-
Victron
Victron Battery Alarm GX
Victron Battery Alarm GX Part Number Weight Dimension (H x W x L) VIC-BPA000100010R 0.2200kg 110 x 155 x 50mm
-
Victron
Victron Interface MK3-USB (VE.Bus to USB)
Victron Interface MK3-USB (VE.Bus to USB) The Victron Interface MK3-USB cable will not only save time and money on your initial install but together with the VictronConnect or VEConfigure 3, it provides the essential interface for carrying out...
-
Morningstar
Morningstar USB MeterBus Adaptor
The USB MeterBus Adaptor converts the Morningstar MeterBus RJ-11 electrical interface to a standard USB 2.0 interface which allows communication between a PC and a Morningstar charge controller or inverter Part...
-
Blue Sea Systems
AC DIN Volt Meter
AC DIN Volt Meter Standard European 72mm design White matte dial with black printed scale and knife-edge pointer Backlit meter face (separate 12 or 24V DC backlight connections) Terminal cover included to prevent accidental short circuit Includes...
-
Blue Sea Systems
Blue Sea Blank Mounting Panel for Single Meter
Blue Sea Mounting Panel Single Meter Panel mounts standard 2-3/4" Analog or Digital Meters Includes mounting screws and centre adjustment hole plug NOTE - This product has a lead time of approximately 8 weeks. It cannot be returned or refunded once...
-
Blue Sea Systems
Blue Sea 360 Panel - M2 Monitor Blank
Blue Sea 360 Panel - M2 Monitor Blank 1 x 1 360 Panel System module mounts any M2 Monitor and matches existing 360 panels Part Number Height Width Weight BSS-1525 121mm 124mm 0.25kg
-
Blue Sea Systems
DC Shunt 500A DC
**check availability prior to ordering** DC Shunt 500A DC - Use with Digital Ammeters For continuous operation, it is recommended that shunts not be run at more than two-thirds (66%) the rated current under normal conditions Shunt...
-
Blue Sea Systems
DC Analog Standard Ammeter with Coil
DC Analog Standard Ammeter with Coil Meters with backlighting for low light conditions Includes appropriate external DC shuntwhen required Backlit meter face (separate 12 or 24V DC backlight connections Function: Standard...
-
ePRO PLUS - Display (CDU) Only
ePRO PLUS - Display (CDU) Only Complete battery status information at a glance (%, V, A, Ah, W, h:m, °C) Supports up to three battery banks (12V, 24V and 48V) Very simple ‘Plug and Play’ installation Perfect integration with...
-
Morningstar
Morningstar Wire Box for ProStar MPPT
The Wire Box for ProStar MPPT provides an effective cover for wires and conduit leading to and from the ProStar MPPT controller. This Wire Box may be required or recommended by authorities having jurisdiction to reduce hazards associated with exposed...
-
BEP Marine
BEP Ammeter Shunt Enclosure - Large
BEP Ammeter Shunt Enclosure - Large Ammeter shunt enclosures provide a protective housing for shunt termination meeting ABYC standards. DC current shunt Item # LB-450-50M ordered separately. Digital large: 450A - 50mV Analog small: 50A - 50mV, 100A...
-
Blue Sea Systems
DC DIN Ammeter with Internal Shunt 0-25A
DC DIN Ammeter with Internal Shunt 0-25A Standard European 72mm design White matte dial with black printed scale and knife-edge pointer Backlit meter face (separate 12 or 24V DC backlight connections) Terminal cover included to prevent accidental...
-
Victron
Victron Interface MK2.2b (VE.Bus to RS232)
Victron Interface MK2.2b (VE.Bus to RS232) The MK2.2 and MK3 provide a galvanically isolated connection to VE.Bus, and it translates the VE.Bus protocol into the “MK2/MK3 Protocol”. The MK2/MK3 Protocol allows reading information, turning...
-
HARDKORR
Hardkorr Remote Battery Monitor with High-Precision 100V/500A Shunt
Hardkorr Remote Battery Monitor with High-Precision 100V/500A Shunt This remote battery capacity monitor, also known as a coulometer, uses a 500A shunt (350A continuous) to return highly accurate readings of battery voltage, live current draw (A) and...
-
Victron
Victron Battery Protect - 12/24V, 100A
Victron Battery Protect - 12/24V, 100A 12/24V auto ranging The VICTRON Battery Protect 12/24V 100A automatically detects system voltage Programming made easy The VICTRON Battery Protect 12/24V 100A can be set to engage / disengage at several...
-
Enerdrive Shunt to Suit Battery Monitors
Enerdrive Shunt to Suit Battery Monitors Part Number ENE-5055150
-
TBS Electronics
TBS Battery Monitor Temperature Sensor Kit - Suits ePRO only
TBS Battery Monitor temperature sensor to suit ePRO only. Black Plastic Monitoring the battery temperature will result in an even more accurate state of charge prediction. Part Number Length Suits TBS-5055310 3m ePRO...
-
TBS Electronics
TBS Battery Monitor Temperature Sensor, Metal Lug - Suits ePRO only
TBS Battery Monitor temperature sensor to suit ePRO only. Metal Lug. Part Number Length Suits TBS-5055341 10m ePRO only
-
Blue Sea Systems
Analog & Digital Meter Single Mounting Panel
Analog & Digital Meter Single Mounting Panel Accepts (1) 2-3/4" Analog or Digital Meter Note: Meter not Included Part NumberWidthHeight BSS-8013 133.3mm 95.2mm
-
Victron
Victron Wall mount enclosure for Color Control GX
Victron Wall mount enclosure for Color Control GX Victron Remote panels & monitoring - Remote panels & monitoring - Wall mounted enclosure for Color Control GX and BMV or MPPT. Part Number VIC-ASS050600000