Networking and Adaptor Cables

Garmin 7-Pin Data Cable with 90-degree Connector Connect your GMI™ 20 or GHC™ 20 to a NMEA 0183 device with this 7-pin power/data cable. Features 90-degree connector for installation in tight spaces or flush mounting Part...

Add 2 high-speed USB ports to your vehicle's 12 V outlet without losing the ability to power your compatible device. Use each USB port to charge a phone, tablet or any other device that needs power on the go. INPUT : 10-30v 5.4A max Output USB :...

Garmin NMEA 2000 Power Cable Supply power to your NMEA 2000 network with our 2 meter (6 ft) power cable. This cable includes a bare uninsulated wire (not shown) which can be grounded to shield the network from interference. Part...

Supply power to your NMEA 2000 network with our 2 meter (6 ft) power cable.

Use our power isolator to ensure sources that could power the bus are separated properly during installation of the NMEA 2000 network.

Garmin NMEA 2000 T Connector Add components to your NMEA 2000 network by installing our T-connector on your backbone cable. The revised version of this T-connector is offset by 45 degrees compared to the previous version. 2 x Female 1 x Male

Extend your NMEA 2000 backbone with our backbone/drop cables (different sizes sold separately).

Mastervolt-Czone drop cables in various lengths. Part Number Length CZO-77060050 0.5m CZO-77060100 1.0m CZO-77060200 2.0m CZO-77060500 5.0m

Raymarine Extender Dongle Part Number RAY-A06030

Raymarine STNG In-Line Terminator Part Number RAY-A06074

Attach two Garmin BlueNet Marine Network Cables with Small Connectors together with this small and robust coupler.  

Forget about fuzzy connections and enjoy crisp, clear audio with minimal noise when using the high performing audio interconnect cables on board. Use the audio interconnect cable to connect your Fusion stereo with an amplifier. Note: When installing,...

Connect your compatible echoMAP CHIRP or ECHOMAP Plus chartplotter/sounder combo to a NMEA 2000 network with this 6 foot (2 meters) adapter cable.

Garmin 8-Pin Transducer to 4-Pin Sounder Adapter Cable Connect an 8-pin transducer to a 4-pin sonar port on a compatible marine device with this adapter cable Part Number GMN-010-12719-00

Garmin 8-pin Transducer to 6-pin Sounder Adapter Cable This adapter allows you to connect newer 8-pin transducers to devices that require a 6-pin connector. Part Number GMN-010-11612-00

Complete 2 tasks with 1 cable using our charging/data clip. Connect the cable to your computer's USB port to recharge your compatible device and to transfer data to and from your computer. NOTE: This cable also pairs with an optional AC adapter...

Garmin Marine Network to Fusion Cable - Small (F) Use Garmin' adapter cables to link your GPSMAP® Series chartplotter to a compatible Fusion® stereo. These cables will connect a Garmin Marine Network port to an RJ45 port and are...

Plug into any 12 V cigarette lighter receptacle to power your Garmin device and conserve battery life. Includes 1.5-amp replaceable fuse. Part Number GMN-010-10851-11

Enedrive NMEA 2000 Device to RV-C Drop Cable RV-C is a CAN-based communication profile for recreation vehicles. It was developed by the Recreation Vehicle Industry Association (RVIA) in the USA Dedicated RV-C components that use an unsealed Pin &...

Garmin GRF 10 Extension Cable Add 5 m (16.4 ft) or 15 m (49.2 ft) to your cable and let your GRF™ 10 rudder feedback sensor reach your GHP™ 12 or 20 Part Number Length GMN-010-11829-01 5m (16...