Transducers & Accessories

Raymarine HV-100 Trolling Motor Mount Part Number RAY-A80557

Raymarine P120 / B120 Paddlewheel & Valve Kit Part Number RAY-D234

This plastic transom mount can be used to replace the dual frequency transducers included with many Garmin units. The 500 W 6-pin transducer has a maximum depth of 1,500 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 40 to 10 degrees; and...

Raymarine Adapter for MotorGuide Transducer

Raymarine Step Mount for RV-100 RealVision 3D Transom Mount Transducer Part Number RAY-A80479

Connect a compatible bare wire transducer to a Garmin 12-pin sounder connector with this wire block adapter. Part Number GMN-010-11613-10

Raymarine Jack Plate Mount for RV-100 RealVision 3D Transom Mount Transducer Part Number RAY-A80480

Garmin Fairing Block Use Garmin's fairing block to position your GT30 series of thru-hull scanning transducers parallel to the water line for increased sonar accuracy. If the deadrise angle of your mounting location exceeds 5 degrees, you should use...

Raymarine RV Ducer High Speed Nose Cone Part Number RAY-A80702

Lowrance StructureScan 3D & TotalScan Skimmer Flush Mount The Flat Mount Kit is used to mount the StructureScan 3D and TotalScan transducers directly to under the step of your boat, which protects the transducer and keeps the transducer out of the...

Lowrance StructureScan HD Skimmer Mounting Bracket The StructureScan HD mounting bracket is designed for transom-mount installations and includes a stainless steel bracket and hardware assembly. Part Number LOW-000-10874-001

Raymarine HV-100 Transom Transducer Bracket

Garmin Mounting Hardware (Panoptix PS70) Install your Panoptix PS70 thru-hull down transducer easily with this mounting hardware. Part Number GMN-010-13230-01

Raymarine HV-300 Transducer Fairing Block

Adaptor cable for CPT-DVS "3-keyway" transducer to use with Raymarine Dragonfly 6 & 7 "Single keyway" Red locking Collars.  

Garmin Mast Cable Run these 25 m (82 ft) or 40 m (131 ft) cables up the mast to connect your gWind™ and gWind Race transducers Part Number Length GMN-010-12117-04 25m (82ft) GMN-010-12117-05 40m (131ft)

CPT-60/70/80 Transducer Extension cable 4m (for red locking collar display) Part Number RAY-A80224

The Raymarine Trolling Motor Bracket is made specifically for Raymarine's Dragonfly Transducers.  

Adaptor cable for CPT-60 transducer to use with Raymarine Dragonfly 4 & 5 Fish Finders.

Raymarine CP370/CP470/CP570 Power Cable Note: Also used for C-and E-Classic Series MFD and M1xx/M2xx thermal camera Part Number RAY-A80346