Sail Track & Cars

Suit external mounting on solid or tubular sections. Push-on beak design allows attachment to the pole ring without manually opening the pin. Attachment point for pin release lines. Accepts up to 9.5mm (3/8" diameter ring or...

Ronstan Series 22 Sheave Kit Block addition kit for Series 22 Control Ends.  Part Number RON-RC00411 Weight 47g Sheave Diameter 40mm Working Load 240kg Breaking...

Ronstan Pin Spanner Pin spanner.  Part Number Weight RON-RD738000 298g

Ronstan Series 14 Ball Bearing Traveller Track - Black Series 14 ball bearing traveller track with 4mm (5/32") countersunk fasteners at 50mm (1 31/32") centres. Made from alloy.  This product is also available in silver here. Part...

Harken 13mm Low-Beam Track 13mm AA Battcar System. Track is extruded from high-grade 6061-T6 aluminium and hardcoat-anodised for a hard, long-lasting surface. Specifications Fasteners: 4 FHmm (#8 FH") Mount Hole Spacing: 50mm (1...

Ronstan Series 32 T-Track Loop Slide with Stop Series 32 T-Track slide with loop and spring-loaded track stop. T-Track systems are high strength, low weight, simple and reliable. Slides have low friction liners to protect the track...

Harken 22mm Slider Battcar - Low-Load Intermediate A Harken® Battcar system along with full-length battens helps raise, douse, and reef with ease and acts as extra crew if you’re sailing shorthanded. Battcar systems outperform in-mast or...

Harken 22mm Heavy-Duty Endstops - Low-Beam, Set of 2 When end controls are not used, add endstops to absorb shock loads Part Number Sheave Dia. Length Weight Max. Line Dia. Max. Working Load Breaking Load Holding...

Ronstan Series 32 I-Track Splice Plate Stainless steel track splice plate for Series 32 I-Track. Features Strong stainless steel bodies Flared sides and angled ball bearing wheels provide high load capacity and smooth...

Ronstan Quick Release Batten Link - M10 Thread Provides movement in all directions and up to 105 degrees either side of centre, for the Series 19, 22 & 26, and up to 112 degrees either side of centre, for the Series 8 Ballslide...

Ronstan Series 19, C-Track - Slide, Soft- Attached Ring, Plunger Stop Features: Spring-loaded plunger stops allow fast, positive positioning of track slides Slides are available with swivelling cleat and fairlead to suit different crewing...

Ronstan Series 32 T-Track Loop Slide Series 32 T-Track slide with loop. T-Track systems are high strength, low weight, simple and reliable. Slides have low friction liners to protect the track. Features Low profile Lightweight Grade 316...

Ronstan Series 32 I-Track, Control End Addition Kit Suits Series 32 I-Beam.  U.V. stabilised Acetal sheaves. Grade 316 stainless steel cheeks.   Part Number RON-RC00414

Ronstan Series 22 Track End Stop - Silver Series 22 track end stop 50mm (1 25/32") x 45mm (1 31/32") in silver. End stop cover plate sold seperately here.  This product is also available in black here.  Specifications Track...

Ronstan Series 22 Track End Stop - Black Series 22 track end stop 50mm (1 25/32") x 45mm (1 31/32") in black. End stop cover plate sold seperately here.  This product is also available in silver here...

Ronstan Connector Plate and Screws for Series 22 Safety Rail Cars Connector plate with screws for Series 22 safety rail cars. Part Number Weight RON-RCC22-5 37g

Ronstan Connector Plate and Screws for Series 30 Safety Rail Cars Connector plate with screws for Series 30 safety rail cars. Part Number MWL Weight RON-RRCC22-4 100kg 37g

Convenient track mounting slugs are available for fitting standard profile track to the luff groove of existing masts. For track & car batten system installation instructions, including use of track mounting slugs follow link https://www...

Patented system uses low profile cars running on twin races of acetal ball bearings. Cars use the existing luff groove of the mast (no track or installation work required). Ball bearings are captive for easy loading and unloading of cars from mast. They...

Ronstan Track - Series 26 - 325mm Gate Track NOTE - THIS PRODUCT HAS A LEADTIME OF AROUND 4 WEEKS Convenient track mounting slugs are available for fitting standard profile track to the luff groove of existing masts. For track & car batten system...