Garmin

GT23M-TM transducer is perfect for coastal and offshore anglers who want CHIRP traditional sonar and CHIRP ClearVü scanning sonar. This transom mount transducer consistently displays clear...

Perfect for coastal and offshore fishermen who want CHIRP traditional sonar and CHIRP ClearVü scanning sonar with a stainless steel stem, this thru-hull mount transducer consistently displays...

This dual beam transducer replaces the one included with your echo series fishfinder. A 500 W 8-pin transducer, it has an operating frequency of 77/200 kHz; a beamwidth of 45/15 degrees; and...

This plastic transom mount can be used to replace the dual frequency transducers included with many Garmin units. The 500 W 6-pin transducer has a maximum depth of 1,500 ft; an operating frequency...

GT52HW-TM transducer is perfect for fresh water and salt water fishermen who want CHIRP traditional sonar and CHIRP ClearVü and CHIRP SideVü scanning sonar. This transom mount transducer...

This bronze thru-hull mount transducer performs well at high speeds and is an excellent choice for fiberglass and wood hulls. This flush-mounted housing protrudes less than a quarter of an inch...

Extend the cable length of your compatible transducer with this 10 ft (3 m) or 30 ft (9 m) cable. Part Number Length GMN-010-11617-50 10...

The only thru-hull transducer that offers depth, speed and temperature in one package, this 8-pin 600 W triducer has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth...

This mid-range 1 kW 8-pin transducer with a narrow beam is good for deep water and bottom definition. It has a depth of 1,500 to 2,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of...

This in-hull or pocket mounted transducer uses narrow beams at low/high frequencies to display depth and temperature data to your Garmin Marine Network via your sonar, such as the GSD 26. Designed...

This plastic thru-hull mount transducer with fairing block uses the low frequencies for deep water performance and high wide frequencies for shallow water performance. A 2 kW in a slightly smaller...

This pocket/chest mounted transducer uses very narrow beams and low frequencies and wide beams for high frequencies to send depth and temperature to your Garmin Marine Network. A pocket version of...

Step up to 1 kW without a fairing with this flush-mounted bronze housing that protrudes less than 1/4-inch outside the hull and can sit on the trailer rollers/bunks without damage. The tilted...

Step up to 1 kW without a fairing with this flush-mounted bronze housing that protrudes less than 1/4-inch outside the hull and can sit on the trailer rollers/bunks without damage. The tilted...

Our plastic transom mount performs well in deep water and provides exceptional bottom and water column detail. The best performing and only 1 kW transom mount, this bare wire transducer has a...

Step up to 1 kW without a fairing with this flush-mounted bronze housing that protrudes less than 1/4-inch outside the hull and can sit on the trailer rollers/bunks without damage. The tilted...

Step up to 1 kW without a fairing block with this flush-mounted stainless-steel housing that protrudes less than 1/4-inch outside the hull and can sit on the trailer rollers/bunks without damage. An...

This plastic smart thru-hull mount transducer provides depth and temperature data to your NMEA 2000 network. This 100 W transducer has a depth of 600 ft; an operating frequency of 235 kHz; a...

Garmin GT20 Transom Mount Transducer with 4-pin Connector (GT20TM) Perfect for the shallow water fisherman who want traditional and CHIRP ClearVü scanning sonar, this transom or trolling motor...

Perfect for the shallow water fisherman who want CHIRP traditional sonar, CHIRP ClearVü and CHIRP SideVü scanning sonar with a stainless steel stem, this thru-hull mounted transducer...