7067 results for 'seaport mount'

Ram Mounts Size B 1" Double Ball Swivel The RAP-B-230-1U consists of dual 1" balls, with a swivel middle connection point, that allow the connection of two 1" socket arms. The swivel feature...

Ram Mounts Universal Adapt-A-Post 2-Hole Drill-Down Base The RAM® Universal Adapt-A-Post™ is the revolutionary answer to combine compatibilty across post and spline systems from RAM® Mounts, Scotty,...

Ram Mounts Tab-Tite End Cups for Panasonic Toughpad FZ-G1 The RAM-HOL-TAB19-CUPSU includes (2 qty) Tab-Tite cup ends and hardware for Panasonic Toughpad FZ-G1. The interchangeable support cups can...

To provide lightweight strength and corrosion resistance, RAM is made of marine grade aluminum with a black powder coated finish, stainless steel hardware and rubber balls Recognized and accepted by...

Ram Mounts Galaxy Tab S 10.5 IntelliSkin The IntelliSkin is a protective sleeve with GDS connection for the Samsung Galaxy Tab S 10.5. The IntelliSkin features an integrated connector which is...

Ram Mounts Composite Octagon Button with Receiver for RAM Pod This part ships with the RAM-POD-I (RAM-316-1A). The female socket fits around a 0.5" dia. flex rod and uses a tightening screw to...

Ram Mounts GDS Powered Vehicle Dock for Handhelds with IntelliSkin The GDS Powered Vehicle Dock for Handhelds with IntelliSkin (RAM-GDS-DOCK-V15-BU) is a rugged dock that will meet and exceed the...

Ram Mounts Next Gen microUSB GDS Locking Vehicle Dock The mUSB locking vehicle dock for IntelliSkin Next Generation features GDS Technology to enable data sync and charging capabilities on the go...

RAM Mounts Double Socket Arm with Single Diamond Plate The RAM-103-238U consists of the 1.5" C size diameter ball and socket system with one open socket end; RAM-201U socket arm is medium length...

RAM Mounts SPOT Gen4 Holder with Small Tough-Claw This kit includes the form-fitting, high-strength composite RAM EZ-Roll’r cradle for the SPOT Gen4. With the RAM Tough-Claw base, you can easily...

Ram Mounts Holder for Garmin GPS Map 176/276/296 RAM plastic holder for GARMIN GPSMAP 176, 276, 296 series. Part Number RAM-HOL-GA7U

Ram Mounts Double Socket Arm Metal Knob Double socket arm with metal tightening knob, which has a socket at either end to fit a B-sized 1.5 inch ball. Part...

Ram Mounts Holder iPad Pro 12.9 The RAM® Mounts EZ-Roll’r™ cradle for the iPad Pro secures your device in a form-fit holder that keeps the entire screen visible. Designed for tablets that are not...

Ram Mounts Finger-Grip Universal GPS and Radio Holder The RAM® Finger-Grip™ is a universal holder that can accommodate a wide range of devices including GPS, handheld radios, phones, bluetooth...

Ram Mounts Size B Ball Stainless Stl 1.25" Ubolt 1" Rubber Ball with stainless steel U-bolt for 1.25" diameters. Part Number Size RAM-B-231-1U   B

Ram Mounts Size B Ball Adapter with 1/2" Hex Pad The RAP-B-409U consists of a 1" diameter rubber ball with an integrated hex post and ability to connect using a machine screw and nylock nut. This...

Ram Mounts Snap-Link Short Double Ball Adapter The RAP-SBA-RRU consists of a 1.43" overall length arm with double RAM-to-RAM balls at each end. This arm serves as the middle attachment point...

Ram Mounts B-Size Ball 2-Hole Pattern Base The RAM-B-202U-12 contains a 1" diameter rubber ball connected to a rectangular plate with a 2-hole pattern of 1.5" center to center. Part...

Ram Mounts Tab-Lock Spring Loaded Holder for 9.7" Tablets The RAM® Tab-Lock™ spring loaded, quick release holder with a keyed lock offers a secure fit with easy access to the mounted tablet. The...

Ram Mounts Size C Tripod with 1.5" Ball Three legs attach to the RAM-202 evenly around the 2.5'' diameter plate.The legs are connected by screws that fit through the holes on the RAM-202. There are...

Ram Mounts Size C 1.5" Ball on 1.5 x 3" Base RAM Mount Aluminum 1.5 inch Ball on 1.5 x 3 inch Plate. Part Number Size RAM-202U-153  C

Ram Mounts 20-60V Hardwire Charger with Female USB-A The GDS Modular Hardwire Charger with Female USB Type A Connector is the ideal solution for providing power to any GDS vehicle solution. With...

Ram Mounts IntelliSkin for Samsung Galaxy S20 Ultra IntelliSkin is a protective sleeve featuring GDS Technology with military-grade drop protection for the Samsung Galaxy S20 Ultra 5G. The...

Ram Mounts Size D Heavy Duty C-Clamp Base The RAM® Heavy Duty C-Clamp Base with D Size Ball (RAM-D-202U-CC1) is a rugged, steel clamp mount designed for flexible, non-permanent device installation...

Ram Mounts Size B Composite Ball Base for 1" Rails The high strength composite rail/handlebar base consists of a 1" rubber ball and clamp that will fit 1" circular rails. Part...

Ram Mounts IntelliSkin for Samsung Galaxy Tablet A 9.7 The IntelliSkin is a protective sleeve with GDS connection for the Samsung Galaxy Tab A 9.7 and 9.7 with S Pen featuring GDS Technology. The...

Ram Mounts Ball with TPI Male Thread RAM-236U A 38mm ball with 3/8" 16 TPI male thread. RAM-237U A 38mm ball, with 1/4" standard camera adaptor thread (20 TPI). Part...

Ram Mounts Locking Form-Fit Holder for Zebra ET6x This key-locking RAM® Dock (RAM-HOL-ZE25LU) features a non-powered form-fit design, specifically for the Zebra ET60 & ET65 tablets. Made for...

Ram Mounts Size B 1" Ball with 0.38" Male Thread An aluminium 0.38" male thread with a 1" ball. Part Number Size RAM-B-236U   B

Ram Mounts Tab-Tite End Cups for 7"-8" Tablets with Cases The RAM-HOL-TAB4-CUPSU includes (2 qty) Tab-Tite cup ends and hardware for holding tablets 7-8" in size with cases. The interchangeable...

Ram Mounts Dakota Plastic RAM Holder Plastic RAM holder to suit the Garmin Dakota 10 and 20 series GPS. All power and data cables can remain connected whilst the holder is in use. Gps Not Included...

Ram Mounts Short Display Bracket Keep your keyboard, phone, dock and/or monitor in one secure, easy to access location with the RAM Accessory/Display Bracket. The RAM-DIS-103-1U supports most...

Ram Mounts Size B Handlebar U-Bolt with Short Arm Consists of a RAM-B-231Z U-Bolt, RAM-B-201U-A short arm, and RAM-B-238U diamond plate Part Number Size RAM-B-149ZU-A  ...

Ram Mounts Size B Plastic Rail Base Flex Rod RAM Rail Base with 1" Ball and (2 qty) 1/4"-20 X 3/8" Stainless Steel Set Screws. Part Number Size RAM-B-309-5U   B

Ram Mounts Form-Fit Holder for Zebra TC22 & TC27 with Boot This spring-loaded, form-fit holder (RAM-HOL-ZE24U) allows you to secure the Zebra TC22 and the TC27 handheld computer with the Rugged Boot...

Ram Mounts Spare Hardware Pack Bolts and Nylock Nuts The RAM Universal Hardware Pack - #8-32 Screws & Nylock Nuts (RAM-HAR-COM-NCU) features our most commonly used hardware. Skip the guessing game...

Ram Mounts NFC Repeater Extension Cable Accessory This NFC repeater (RAM-GDS-CAB-NFCU) acts as an extension (30cm) of the NFC reader on the back of compatible devices giving end users easier access...

Ram Mounts IntelliSkin for Samsung Galaxy S10+ Plus IntelliSkin is a protective sleeve featuring GDS Technology with military-grade drop protection for the Samsung Galaxy S10+ Plus. The...

Ram Mounts Shoulder Strap for IntelliSkin Thin-Case The GDS® Shoulder Strap Accessory for IntelliSkin® Thin-Case™ (RAM-GDS-SS1-TCU) utilizes screw-in swivel attachments to install directly into the...

Ram Mounts Size B Adapter Plate AMPS The RAM-B-347U base consists of a 1" diameter rubber ball connected at right angles to a 2" x 1.7" square base. The base has four pre-drilled holes at each...

Ram Mounts IntelliSkin for Samsung Galaxy Xcover 4s IntelliSkin is a protective sleeve featuring GDS Technology for the Samsung Galaxy Xcover 4s with military-grade drop protection. The...

Ram Mounts Vent-Temp Rectangular Vent Adapter This rectangular vent cover (RAM-VENT-RCTU) for the RAM® Vent-Temp™ temperature module accessory installs to the 50" hose that comes with the...

Ram Mounts Size B Cessna Seat Rail Base Thin rail mount designed to mount a half or quarter inch threaded pipe, and connects to the seat rails with the two included bolts.   Part...

Ram Mounts IntelliSkin Galaxy Tab 4 7.0 The IntelliSkin is a protective sleeve with GDS connection for the Samsung Galaxy Tab 4 7.0. The IntelliSkin features an integrated connector which is molded...

Ram Mounts Size B Ball Adapter with Flex-Rod Receiver   Part Number Size RAP-B-114-FRBBU   B

Ram Mounts Snap-Link Long Ball Adapter for Garmin The RAM-to-Garmin double ball LONG arm will attach to the EZ-Strap™ base, making it a complete mounting system for Garmin GPS devices that contain a...

Ram Mounts Size B Spline Post Ball Adapter Convert any RAM post/spline base into a ball base on your boat or kayak with this 1" ball with spline post. With this adapter you can use your existing...

Ram Mounts Quick-Draw Jr. Universal Printer Holder The RAM® Quick Draw™ Jr. holder uses a unique patent pending spring loaded mechanism that holds strong, yet provides easy removal for printer...

Ram Mounts Size E Size Ball Round Base The RAM-E-202U consists of a 3.38" diameter rubber ball, connected at right angles to a 3.68" diameter round plate. The plate has pre-drilled holes in the base...

Ram Mounts GDS IntelliSkin Wrist Strap This strap allows you to comfortably carry and use your IntelliSkin-enabled device while keeping it secured to your wrist. The GDS wrist strap quickly and...

Ram Mounts Size B Short Arm Diamond Plate Set The RAM-B-138U-A consists of a 2.5" diameter round base that contains the universal AMPs hole pattern, SHORT double socket arm and diamond base adapter...

Ram Mounts Form-Fit Holder for Zebra ET5x 8.3" & 8.4" Series The GDS® Vehicle Dock features a form-fit design specifically for the Zebra ET5x 8.3" & 8.4" series tablets, including cutouts leaving...

Ram Mounts Size B Tough-Claw Medium Clamp with Diamond Plate The RAM-B-404-238U consists of the medium RAM Tough-Claw base, marine-grade aluminum double socket arm and diamond base adapter. The...

Ram Mounts iPhone 12 and 12 Pro Plastic Holder This high-strength composite, form-fit cradle was designed specifically for the Apple iPhone 12 & 12 Pro. Allowing for easy one-handed docking and...

Ram Mounts GDS Powered Dock Zebra ET4x 8" Tablet with IntelliSkin Featuring GDS Technology for charging capabilities, the GDS Vehicle Dock for Zebra ET40 & ET45 8" enterprise tablets with...

Ram Mounts Short Double Socket Arm C Size This RAM arm has a socket at each end for a 1.5" ball. Part Number RAM-RAM-201U-B

Ram Mounts Power Plate II Magnetic Holder with Flex Adhesive Base Part Number RAP-SB-178-300U

Ram Mounts Composite U-Bolt Adapter for Handlebars Plastic quarter moon sleeve to broaden grip of 231 type U bolts. Part Number RAP-319U

Ram Mounts Size B Handi-Case Ball Base Hardware Included (1) #10-24 x 1.5" Machine Screw. (1) #10-24 Nylock Nut. (1) RAM Pin-Lock Adapter Washer.  Materials High strength composite

Ram Mounts Size C Handi-Case Ball Base Hardware Included (1) #10-24 x 2.25" Machine Screw (1) #10-24 Nylock Nut (1) RAM Pin-Lock Adapter Washer Materials High strength composite.  ...