7256 results for 'strain mount'

RAM Mounts C-Size Ball 2-Hole Pattern Base The RAM-202U-12 contains a 1.5" C-sized diameter rubber ball connected to a rectangular plate with a 2-hole pattern of 1.5" center to center...

RAM Mounts Clamp Arm 180 Degree Pipe Socket Clamp arm with 180 degree extension with pipe socket. Similar to RAM-261-1 at 90 degree Part Number RAM-200-CHU

Ram Mounts Size B PVC Pipe Socket with Ball The RAP-B-294U consists of a 1" diameter ball with female PVC slip pipe socket. The socket can connect to any RAM PVC pipe and can be permanently...

Ram Mounts Size B Tough-Claw with Garmin Spine Clip The RAM Spine Clip holder is a mount adapter that easily clips into the integrated spine connection on a wide variety of Garmin devices. With the...

Ram Mounts Size C Track Ball with T-Bolt The RAM Track Ball is made up of a C size 1.5" ball molded to a marine-grade aluminum base, a rubber friction washer and a stainless steel T-bolt for sliding...

Ram Mounts Size C 1.5" Ball on 1.5 x 3" Base RAM Mount Aluminum 1.5 inch Ball on 1.5 x 3 inch Plate. Part Number Size RAM-202U-153  C

Ram Mounts Size B Double 25mm Balls Round Plate Double adapter 25mm Balls and round mount plate. Suits any RAM-B-201, 201A, 201C clamp, or any RAM-B system. Part...

Ram Mounts 2-Pack Vertical Tie Down Track Accessory As a pack of two, the RAM® Vertical Track Tie Down system features a T-Bolt and provides an anchor point for use with a track mounting system,...

Ram Mounts Size C Single Socket Arm with Octagon Socket The single socket for a C size 1.5” ball that has a socket for Octagon Button products. This configuration gives you the ability to interface...

RAM Mounts SPOT Gen4 Holder with Small Tough-Claw This kit includes the form-fitting, high-strength composite RAM EZ-Roll’r cradle for the SPOT Gen4. With the RAM Tough-Claw base, you can easily...

Ram Mounts Locking GDS Vehicle Phone Dock with MicroUSB for IntelliSkin The GDS Locking Vehicle Phone Dock with mUSB for IntelliSkin is the new key locking phone dock designed to fit all compatible...

Ram Mounts Size C Double Socket Swivel Arm Materials High strength composite.     Part Number Ball Size RAP-200-12U C Size (1.5")  

With the RAM Tough-Track, flat surface mounting possibilities are nearly endless for ATVs, cars, combines, motorboats, tractors, trucks, and more. This track mount solution can be drilled to any...

Ram Mounts IntelliSkin for Samsung Galaxy A20e IntelliSkin is a protective sleeve featuring GDS Technology for the Samsung Galaxy A20e (SM-A202) with military-grade drop protection. The IntelliSkin...

Ram Mounts Universal Microphone Clip Adapter Here at RAM® we are all about options. Even when approaching a simple design we make sure to present several options to our customers so we are sure to...

Ram Mounts Size B Double Socket Arm with Diamond Plate The RAM-103-238U consists of a diamond base and standard length double socket arm that will accept 1" ball bases. The diamond base measures 2...

Ram Mounts Tab-Tite for Samsung Galaxy Tablet A 8.0 The RAM® Tab-Tite™ spring loaded, quick release cradle offers a secure fit with easy access to the mounted tablet. The interchangeable cup ends...

To provide lightweight strength and corrosion resistance, RAM is made of marine grade aluminum with a black powder coated finish, stainless steel hardware and rubber balls Recognized and accepted by...

Ram Mounts Hand Strap for GDS Tab-Conn The GDS® Hand Strap for GDS® Tab-Conn™ (RAM-GDS-TC-HS3U) offers drop protection for mobile workers using their tablets while on the go. To install, press the...

Ram Mounts Universal Spring Loaded Holder for Small Phones The RAM-HOL_UN1U is designed to hold a large amount of different kinds of cell phones and small electronic devices. This cradle has padded...

Ram Mounts Size B Gim-Ball Fishfinder Gimbal Base Adapter The RAM Gim-Ball Fishfinder Gimbal Base Adapter (RAM-B-463-GU) creates an entirely new mounting location off the side of gimbal-mounted...

Ram Mounts IntelliSkin for Samsung Galaxy XCover7 Wrap your new Samsung Galaxy XCover7 in an IntelliSkin protective sleeve to guard your device from damage while providing a user-friendly charging...

Ram Mounts Size B X-Grip UN7 with Brake Clutch Plate The RAM-B-174-UN7U consists of hardware for mounting to either brake/clutch reservoirs and rails that are 0.5" to 1.25" in diameter, double...

Ram Mounts Magnetic Strap Replacement for GDS Hand-Stand This replacement strap is compatible with any GDS Hand-Stand and Hand Strap accessory for phones or tablets with IntelliSkin or RAM Skin...

Ram Mounts Holder for Garmin GPS Map 176/276/296 RAM plastic holder for GARMIN GPSMAP 176, 276, 296 series. Part Number RAM-HOL-GA7U

Ram Mounts Size B Ball Composite Double Socket Arm The RAP-B-201U-A consists of a short double socket arm that accommodates 1" B size ball bases, device holders, and adapters. With an overall...

Ram Mounts Size B VIRB Camera Adapter 1" Ball The RAM-B-202U-GA63 consists of a 1" diameter rubber ball, connected to a custom Garmin VIRB camera adapter. The adapter attaches directly to the...

Ram Mounts Short Double Socket Arm C Size This RAM arm has a socket at each end for a 1.5" ball. Part Number Size RAM-201U-B  C

Ram Mounts Size E Size Ball Round Base The RAM-E-202U consists of a 3.38" diameter rubber ball, connected at right angles to a 3.68" diameter round plate. The plate has pre-drilled holes in the base...

Ram Mounts Size B Ball Adapter with Flex-Rod Receiver   Part Number Size RAP-B-114-FRBBU   B

Ram Mounts Size E Short Double Socket Arm RAM 12.7cm long E-sized short arm. Part Number Size RAM-E-201U-D   E

Ram Mounts Size B M6 Thread with 1" Ball The RAM-B-273-M6U includes a Hex M6 female threaded hole connected to a 1" rubber ball. Part Number Size RAM-B-273-M6U   B

With the RAM Tough-Track, flat surface mounting possibilities are nearly endless for ATVs, cars, combines, motorboats, tractors, trucks and more. The extruded aluminum version of the RAM Tough-Track...

Ram Mounts Round Platform Base with AMPS Hole Pattern Round platform base for either resting on or screwing down to a flat surface, and then attaching an AMPS hole pattern part (such as RAM-B-202...

Ram Mounts Size B Spline Post Ball Adapter Convert any RAM post/spline base into a ball base on your boat or kayak with this 1" ball with spline post. With this adapter you can use your existing...

Blending the best of versatility, strength and installation ease; the RAM POD HD is a workhorse for fleet and serious consumers alike. Compatible with a wide range of vehicles and simple to install,...

Ram Mounts Skin for Samsung Tab A9 The RAM® Skin™ for Samsung Tab A9 (RAM-SKIN-SAM97) is a form-fit, MIL-STD-810H drop test protected sleeve designed specifically for the Tab A9. It is a...

Ram Mounts GDS Hardwire Charger The GDS Modular Hardwire Charger is the ideal solution for providing power to any RAM or GDS DC powered docking station. When it comes time to upgrade, avoid any...

Ram Mounts Size B Heavy Duty C-Clamp Base The RAM® Heavy Duty C-Clamp Base with B Size Ball (RAM-B-202U-CC1) is a rugged, steel clamp mount designed for flexible, non-permanent device installation...

Ram Mounts Sun Visor with Ball Adapter This 13" x 8" precision laser cut cast acrylic sun visor offers ideal blockage of glare while ensuring no obstruction or distortion of view. The dark grey 50%...

Ram Mounts Size B 1" Ball with Chrome U-bolt 1" Rubber Ball with chrome finish U-bolt for 3/4" to 1" diameters. Part Number RAM-B-231CHU

Ram Mounts Size B Female 0.25-20 Hole with Ball Part Number Size RAM-B-348U   B

Ram Mounts Size C Double Socket Arm with Metal Knob The RAM-201MU-D, LONG length double socket arm with metal knob, has a socket at both ends that accommodates 1.5" ball bases. A single spring...

Ram Mounts Spare Hardware Pack Bolts and Nylock Nuts The RAM Universal Hardware Pack - #8-32 Screws & Nylock Nuts (RAM-HAR-COM-NCU) features our most commonly used hardware. Skip the guessing game...

Ram Mounts Size B Chrome Long Arm 1" Balls A chrome plated arm with a socket at each end to hold a 1" diameter ball. The arm is 7.62cm (3") long. Part...

Ram Mounts Vehicle Dock with USB-C for XCover6 Pro and XCover7 with IntelliSkin The GDS Vehicle Dock for Samsung XCover6 Pro with IntelliSkin (RAM-GDS-DOCK-V3CPAU) is a spring-loaded, quick release...

Ram Mounts iPhone 12 and 12 Pro Plastic Holder This high-strength composite, form-fit cradle was designed specifically for the Apple iPhone 12 & 12 Pro. Allowing for easy one-handed docking and...

Ram Mounts Skin for Samsung Tab Active3 This RAM® Skin™ was designed specifically for the Samsung Tab Active3, and features MIL-STD-810G military-grade drop protection and a built-in S Pen holder...

Ram Mounts GDS Roto-Mag 4-in-1 for Zebra ET6x This version of the GDS Roto-Mag (RAM-GDS-ROTO2-ZE25U) is designed specifically for the Zebra ET60/ET65 tablet. This Zebra ET60/ET65 tablet accessory...

Ram Mounts Center Connector for Modular Aluminium Tough-Track The Center Loader allows for the connection of two Extruded Aluminum Tough-Track™ systems in a straight line and provides a loading...

Ram Mounts Size B Tough-Ball Adapter for Insta360 The RAM® Tough-Ball™ Adapter for Insta360 (RAP-B-379U-252025-RW) unlocks the RAM® ball and socket mounting system. For thrill-seekers capturing...

Ram Mounts Size B Rectangular Plate 2 x 4" (50x100mm) 25mm ball mounted on rectangular plate 50 x 100mm (2" X 4" W) with corner holes, suits all Ram Mounting systems. Part...

Ram Mounts Size B Tough-Claw Medium Clamp with Diamond Plate The RAM-B-404-238U consists of the medium RAM Tough-Claw base, marine-grade aluminum double socket arm and diamond base adapter. The...

Ram Mounts Form-Fit Cradle for TomTom ONE 2nd & 3rd Editions The RAM-HOL-TO4U consists of a high strength composite cradle and hole pattern that will allow the attachment to all RAM components or...

Ram Mounts Size C Ball Adapter for 5 Spot Base Materials High strength composite.      Part Number Ball Size RAP-114-5BU C Size (1.5")

Ram Mounts Size B Tough-Mirror Left Mirror with Ball The RAM Tough-Mirror Left Mirror with Ball (RAM-B-465LU) is designed for the adventurer. Whether you're cruising down the interstate or pushing...

Ram Mounts Composite Octagon Button with Round Plate The High Strength Plastic Universal Plate has a 1.0"diameter Round Male Button on an Octagon Neck, connected at right angles to a 2.5" diameter...

Ram Mounts GDS Uni-Conn Adapter for IntelliSkin The GDS Uni-Conn Adapter for IntelliSkin (RAM-GDS-U1U) is designed to make any IntelliSkin compatible with the revolutionary Uni-Conn docking...

Ram Mount C Size Ratchet Adapter with 1.5" Socket Arm Ratchet Adapter with C-Size Single Socket Arm   Part Number Size RAM-162BAU  C

Ram Mounts Vent-Temp Rectangular Vent Adapter This rectangular vent cover (RAM-VENT-RCTU) for the RAM® Vent-Temp™ temperature module accessory installs to the 50" hose that comes with the...