6841 results for 'starport mount'

Ram Mounts Size B Round Plate with 45 deg Thread Ram mount with 0.25 inch NPT female thread at a 45 degree angle to the base. This base connects to any 0.25 inch NPT male thread. Part...

Ram Mounts Size C Double Socket Arm with Round Ball Plate The RAM-103U-B consists of the 1.5" diameter ball and socket system with one open socket end. This mount is designed to be used with...

Ram Mounts Size C 50x100mm Half VESA Plate with Ball The RAM-243U consists of a 1.5" diameter rubber ball connected to a flat rectangular 2.81" x 5" base. The rectangular base...

Ram Mounts Tab-Lock Locking Holder for 8" Tablets The RAM® Tab-Tite™ spring-loaded, quick release holder offers a secure fit with easy access to the mounted tablet. The...

Ram Mounts USB Type-C 80cm Extension Cable This USB Typce C 3.1 extension cable measures .8 meters in length, and features USB Type-C male connector on one end and female connector on the other for...

Ram Mounts Power-Grip Universal Scanner Gun Fin Replacements The RAP-396F-2U are replacement fins for the RAP-396U. The replaceable elastomeric fins grip the handle of the scanner tight to ensure...

Ram Mounts Tab-Tite End Cups for ToughPad FZ-A1 with Case The RAM-HOL-TAB9-CUPSU includes (2 qty) Tab-Tite cup ends and hardware. The interchangeable support cups can be used, along with all RAM...

Ram Mounts Plastic Holder for iPhone X and XS This high-strength composite, form-fit cradle was designed specifically for the Apple iPhone X and XS. Allowing for easy one-handed docking and...

Ram Mounts Tab-Tite End Cups for 9.7" Tablets The RAM-HOL-TAB28-CUPSU includes (2 qty) Tab-Tite cup ends and hardware for 9.7" tablets. The interchangeable support cups can be used, along...

15cm flexible arm with diamond plate and large suction cup at one end. The diamond plate is the same size as the the (RAM-238) so will attach to RAM plastic holders/cradles, and suction cup...

Ram Mounts GDS USB Type C 3.0 Cable Genuine GDS Male USB-A 3.0 to Male USB Type-C 3.0 Cable, 120cm in length. If your RAM dock has been upgraded or superceded by a USB-C only version, then this...

Ram Mounts X-Grip Red Rubber Cap 4-Pack Add some color to your RAM® X-Grip® phone or tablet holder. The RAP-UN-CAP-4-RED consists of four red post caps that fit all versions of...

Ram Mounts Size C Double 1.5" Ball Adapter Allows you to connect two sockets together, to give you just that extra little bit of length. Part NumberSize RAM-230U  C

Ram Mounts Universal Adapt-A-Post 2-Hole Drill-Down Base The RAM® Universal Adapt-A-Post™ is the revolutionary answer to combine compatibilty across post and spline systems from...

Ram Mounts Tab-Tite End Cups for Panasonic Toughpad FZ-G1 The RAM-HOL-TAB19-CUPSU includes (2 qty) Tab-Tite cup ends and hardware for Panasonic Toughpad FZ-G1. The interchangeable support cups can...

Ram Mounts EZ-Roll'r Powered Dock for Sonim XP10 The RAM® EZ-Roll'r™ Powered Cradle for Sonim XP10 secures your device in a form-fit holder while keeping the entire...

Ram Mounts Round Platform Base with AMPS Hole Pattern Round platform base for either resting on or screwing down to a flat surface, and then attaching an AMPS hole pattern part (such as RAM-B-202...

Ram Mounts Size B Ball Stainless Stl 1.25" Ubolt 1" Rubber Ball with stainless steel U-bolt for 1.25" diameters. Part Number Size RAM-B-231-1U  ...

Ram Mounts Next Gen GDS Slide Dock Module This GDS Slide Dock module is compatible with Next Generation IntelliSkin sleeves, allowing you to upgrade any existing GDS Slide Dock. The module can be...

Ram Mounts M10-1.25 Thread Extension - 20mm Long The RAM® M10-1.25 Thread Extension - 20mm Long (RAM-M10125-TE) raises the mirror connection point on motorcycles by 20mm. This adapter is...

Ram Mounts Size C Rail Clamp for 2" - 2.5" (5cm- 6.3cm) Rails This double ball rail base accommodates rails from 2" to 2.5" in diameter. With two C size 1.5" diameter ball...

RAM Mounts USB Tough Hub Features: 6 qty 5v Powered USB 2.0 Ports1 qty 10/100 MBPS Ethernet Port Threaded power input for 12-48 VDC input Strain Relief connection points Ignition Trigger: The...

Ram Mounts Pin-Lock Security Kit for RAM Pod HD Pin-Lock™ Security Knob Kit for the RAM POD HD™ replaces the stock knobs with theft deterrent Pin-Lock™ knobs...

Ram Mounts B-Size Ball 2-Hole Pattern Base The RAM-B-202U-12 contains a 1" diameter rubber ball connected to a rectangular plate with a 2-hole pattern of 1.5" center to center...

Ram Mounts GDS Powered Dock Zebra TC2x TC5x The GDS® Vehicle USB-C Dock for Zebra TC2x/5x in IntelliSkin®, Power only (RAM-GDS-DOCK-V12-ZE2434CPU) is designed to fit the...

Ram Mounts 20-60V Hardwire Charger with Female USB-A The GDS Modular Hardwire Charger with Female USB Type A Connector is the ideal solution for providing power to any GDS vehicle solution. With...

Ram Mounts Size B Double Socket Arm with Retention Knob Long The RAM-B-201-C-KRU, long double socket arm, has a socket at both ends that accommodate 1" ball bases. A single spring inside the...

Ram Mounts Size C Ball with 0.25"-20 (5-6mm) Hole C-sized 1.5 inch ball on 0.25 inch-20 hole. Part Number Size RAM-337U   C

Ram Mounts IntelliSkin for iPad Pro 9.7 The IntelliSkin is a protective sleeve for the Apple iPad Pro 9.7 featuring GDS Technology. The IntelliSkin will bring drop protection to your device and...

RAM Mounts Clamp Arm 180 Degree 1/2" NPT Female C size clamp with 1/2" female NPT thread at 180deg, similar to RAM-261 90 degree Part Number RAM-200-1U

Ram Mounts Tab-Lock Spring Loaded Holder for 9.7" Tablets The RAM® Tab-Lock™ spring loaded, quick release holder with a keyed lock offers a secure fit with easy access to...

The RAM-VP-SW1-47 consists of a 7" lower female Tele-Pole, 4" upper male Tele-Pole, double swing arm and 2.5" round base that contains the universal AMPs hole pattern. The lower...

Ram Mounts Size C 1.5 Inch Ball 2.5 Inch Base Ram 1.5" ball with 2.5" base with standard AMPS hole pattern, and marine pattern. This part is slightly different than the usual ball mount - it has a...

Ram Mounts Tab-Tite End Cups for 7"-8" Tablets with Cases The RAM-HOL-TAB4-CUPSU includes (2 qty) Tab-Tite cup ends and hardware for holding tablets 7-8" in size with cases. The...

Ram Mounts Powered Holder XCover6 Pro With Factory OR RAM Skin This RAM EZ-Roll’r powered dock is designed specifically for the Samsung Galaxy XCover6 Pro wrapped in the RAM Skin (RAM-SKIN-SAM84)...

Ram Mounts Size B Plastic Rail Base Flex Rod RAM Rail Base with 1" Ball and (2 qty) 1/4"-20 X 3/8" Stainless Steel Set Screws. Part...

Ram Mounts IntelliSkin for Samsung Galaxy Tablet Xcover 4 IntelliSkin is a protective sleeve featuring GDS Technology for the Samsung Galaxy Xcover 4 with military-grade drop protection. The...

Ram Mounts IntelliSkin for iPhone 16 Plus The IntelliSkin® for Apple iPhone 16 (RAM-GDS-SKIN-AP48-C) is a protective sleeve made of a soft, shock-absorbing rubber custom fit for the iPhone...

Ram Mounts Size B RAM Base GPSMAP 600 Series Base and 1 inch ball designed to attach to the Garmin GPSMAP 600 series of GPS. The standard cables can remain attached with the use of this holding...

Ram Mounts GDS Locking Powered Dock for Zebra EC50 EC55 The GDS Vehicle USB-C Dock for Zebra EC50/EC55 in IntelliSkin, Locking, Power (RAM-GDS-DOCKL-V12-ZE16CPU) is designed to fit the...

Ram Mounts Key Locking Holder iPad Pro 11" The RAM EZ-Roll’r key-locking cradle for the iPad Pro 11” secures your device in a form-fit holder while keeping the entire screen...

Ram Mounts Pin-Lock 4-Hole AMPS Plate Adapter The RAM® Pin-Lock™ 4-Hole AMPS Plate Adapter (RAP-347PLU) features a unique pin-lock pattern, most often found on the...

Ram Mounts Size B Composite Ball Adapter with AMPS Plate The RAP-B-347U base consists of a 1" diameter rubber ball connected at right angles to a 2" x 1.7" square base. The base has...

Ram Mounts Tough-Dock and Cool-Dock Locking Top Latch This key-locking top assembly latch is designed to attach to the top of any GDS Tough-Dock or Cool-Dock. This latch includes a set of keys and...

Ram Mounts Safe-Case for Apple iPad mini (A17 Pro) and mini 6 The RAM® Safe-Case™ for Apple iPad mini (A17 Pro) & mini 6 (RAM-TE-AP36) is a rugged, modular enclosure designed...

Ram Mounts GDS CAN Bus with FMS Connector The GDS CAN Bus with FMS Connector (RAM-GDS-CAN-FMSU) revolutionises the traditional CAN Bus, featuring a Direct-To-Tablet broadcast that allows the CAN Bus...

Ram Mounts Size B Ball Adapter for RAM X-Grip The RAM-HOL-UN7-BALLU consists of a 1" diameter rubber ball and hardware for attaching to the back of the RAM-HOL-UN7U cradle. Materials High...

Ram Mounts GDS Hand-Stand for Panasonic FZ-A3 Designed specifically for the Panasonic FZ-A3, the GDS Hand-Stand for Panasonic FZ-A3 is a two-in-one hand strap and kickstand. Its unique design...

Ram Mounts Tab-Tite HD 8" Tab 4 Defender The RAM® Tab-Tite™ spring loaded, quick release cradle offers a secure fit with easy access to the mounted tablet. The...

Ram Mounts Pod HD Reverse Vehicle Base The RAM® Pod HD™ Reverse Vehicle Base (RAM-316-HDRBU) is a versatile vehicle solution, boasting an easy installation and made of...

Ram Mounts Size B Ball with M6 Bolt for 22 Toyota Tundra Grab Handle The RAM Grab Handle Bolt Adapter Base is the ideal base for installing RAM Mounts on a Toyota Tundra's grab handle using a...

Ram Mount Size C Ball Adapter for Honeywell Xenon 1902 The RAP-202U-HON2 consists of a 1.5" ball, connected to a custom base and hardware that is designed to attach to the the Honeywell Xenon...

Ram Mounts Size B Ball Base with 5/16"-18 Post The RAM-B-239U consists of a 1" diameter rubber ball, connected to a 5/16"-18 threaded post. Part...

Ram Mounts Size C Ball Square Rail Clamp 4" (10cm) Width Aluminium rail clamp to allow 4 inches width with a 1.5 inch ball. Part Number RAM-247U-4

Ram Mounts Combo Locking Holder for IPad Pro 11" The RAM EZ-Roll’r combination-locking cradle for the iPad Pro 11” secures your device in a form-fit holder while keeping the entire...

Ram Mounts Qi2 15W Wireless Charger Puck The RAM® Qi2 15W Wireless Charger (RAM-GDS-CHARGE-W2M) is built for the toughest conditions, featuring an IP67 waterproof rating and a durable woven...

Ram Mounts Power Plate II Magnetic Holder with Flex Adhesive Base Part Number RAP-SB-178-300U

Ram Mounts Power + Data Dock for Zebra ET5x 8.3" & 8.4" Series Featuring GDS® Technology™ for data and charging capabilities, the GDS® Vehicle Dock for...

Ram Mounts Size B 1" Ball Plate for TOMTOM RIDER The RAM-B-238-TO2U connects to the back of the factory cradle that is included with the purchase of the TomTom Rider. The screws that are...

Ram Mounts Size B 1" Tough-Ball .50" Post The RAP-B-379U-252050 consists of a 1" diameter rubber ball, connected to a 1/4"-20 X .50" male threaded post. The male thread...