3338 results for 'rule bilge pump non-auto'

Patay D120 Conrad Assembly Kit for models 23510, 23511 and 23512. 

Shurflo® Wingnut Swivel 3/4" GHT (M) - 1/2" NPT (F). Suits hose nozzle SAW-23952. Part number SAW-23982

End Plug for quick connect 15 manufactured by Whale. Internal brass end plug for Quick Connect 15 fittings. Part Number WHL-136626

Elbow Adaptor for quick connect 15 manufactured by Whale. Elbow fitting that accepts Quick Connect 15 tubing one end, 1⁄2" BSP brass internal thread the other end. Part...

Straight Joiner for quick connect 15 manufactured by Whale. In-line connection for Quick Connect 15 tubing. Part Number WHL-136620

Flush Link RV Water 130 Degree with Valve Ideal for campers, RVs, offroad vehicles, storage tanks, DIY applications etc. Lead-free and corrosion resistant 316L stainless steel. Double Viton...

DMfit Mounting Clip - 15mm Tube Part Number Pack Size Type Weight Tube O.D. DMF-448278 1 Mounting Clip 10g 15mm DMF-448278-10 10 Mounting Clip 100g 15mm

DMfit Stem Plug - 15mm Tube Part Number Pack Size Type Weight Tube O.D. DMF-448264 1 End Stop 20g 15mm DMF-448264-10 10 End Stop 200g 15mm

Twistloc Manifold Dual Bracket Cover Used to label manifold branches. Part Number Pack Size Type SAW-449764 1 Manifold Dual...

Twistloc Female Straight Connector - Brass BSP parallel thread with 'O'ring seal. Part Number Pack Size Type Tube O.D. Thread SAW-449220 1 Female...

Stem Elbow for quick connect 15 manufactured by Whale. Elbow fitting accepts Quick Connect 15 tubing one end. 15mm stem fitting the other. Part Number WHL-136640

Elbow Joiner for quick connect 15 manufactured by Whale. Elbow fitting for use with Quick Connect 15 tubing. Part Number WHL-136622

'T' Hose Tails made with polypropylene. BSP external thread with barbed hose tails. Made from polypropylene. Part NumberThread BSPHose Size BLA-138385 3/4" 19mm (3/4")

DMfit Union Tee Part Number Pack Size Type Weight Tube O.D. (A) Tube O.D. (B) Tube O.D. (C) DMF-448250 1 Two Way Divider Union 20g 15mm 15mm 15mm DMF-448250-10 10 Two Way Divider...

Twistloc Manifold Single Bracket Cover Used to label manifold branches. Part Number Pack Size Type SAW-449762 1 Manifold Single...

Twistloc Male Straight Connector - Brass BSP parallel thread with 'O'ring seal. Part Number Pack Size Type Tube O.D. Thread SAW-449210 1 Male Straight...

Pressure relief valve preset to 500kPa. Replacement hot water pressure relief valve to suit Isotemp water heaters. Threaded 1⁄2" BSP and preset to 500kPa. Requires 135730 and a...

Bora Tapware Range with single control.  COLD water only.  Italian made chrome plated brass. Range includes single and double tap controls in a variety of handle styles plus hot and...

Odour Free Sanitation Hose available in 20m rolls. Odour permeation in marine sanitation systems is not only unpleasant but also presents health risks. Odour free sanitation hose has up to five...

Suitable for food and beverage contact as well as low pressure general purpose delivery.  Meets the AS2070 Australian Standard food contact requirements Made in Taiwan Please...

High speed thru-hull livewell water pickups available in 316 grade stainless steel 3/4" BSP threaded to screw into a stainless steel or plastic ball valve. Note: A valve must be used...

Seaflo Joker Valve for Toilet The Seaflo Joker Valve is an essential component for marine toilet systems, designed to prevent backflow and ensure smooth sewage flow. Made from high-quality,...

Flush drains for sink wastes. Moulded white nylon. Unique design provides 90º elbow or straight mounting. The countersunk inner sink fitting is in itself a tail, simply cut down the outer...

Single Faucet Tap manufactured by Whale. Swivelling standard faucet for cold water only systems. Part NumberMount BaseHose SizeHeight Above BenchMount Screws WHL-134100 112mm x...

Bora Tapware Range with dual control. Italian made chrome plated brass. Double tap controls with hot and cold mixer unit. Faucet (134226 excluded) can be laid flat for easy and convenient...

End Caps made with polypropylene. Internal BSP thread end cap. Made from polypropylene. Part NumberThread BSPAvailability BLA-138554 1/2" Normally in...

Drain Cover made with stainless steel. Polished stainless cover for floor drains and vents. Part Number Diameter Mount Screws BLA-138822 83mm 4mm r/h

Hose Tails made with acetal. Top quality white acetal hose tails. BSP thread. Part NumberThread BSPHose SizeOverall Length BLA-138304 1/2" 13mm (1/2...

Recessed Toilet Paper Holder manufactured by SSI. Flush appearance to match todays interiors. The design keeps paper dry and out of sight while still being conveniently at hand. Perfect for...

Reinforced White Hose (sold per metre). Ideal for marine toilet installations. A flexible reinforced smooth bore pressure hose. Also great for a wash-down hose. Part NumberColourI.D.Selling...

90 Degree Spare Waste with Cap. To suit 20mm or 25mm waste hose Cut out 53mm. Part NumberThreadHose Diameter SAW-50733 1-1/4" BSP 20mm - 25mm    

Trudesign Tank Fittings - 90 Degree. Specifically designed to suit Tank Fitting Tubes (450228, 450229). Glass reinforced nylon composite - High strength, stiffness and light weight. Immune to...

Seaflo Pressure Switch 70 PSI PS70X suits the current 51series SFDP1-050-070-51X Part Number Suits Amps SFL-PS70X 51series 20Amp

Harken's pressurized carbon fiber/composite reservoirs are among the lightest in the existence. They are installed in the bilge rather than at pump level for a low center of gravity.Maximum...

Harken's pressurized carbon fiber/composite reservoirs are among the lightest in the existence. They are installed in the bilge rather than at pump level for a low center of gravity.Maximum...

Black plastic adaptor that has a USA garden thread connection on one end with an Australian garden hose plug-in connection on the other end. The threaded end will screw into the brass threaded end...

Trudesign Tank Fittings - 120 Degree. Specifically designed to suit Tank Fitting Tubes (450228, 450229). Glass reinforced nylon composite - High strength, stiffness and light weight. Immune to...

Dometic Float/Stem (Barbed) Kit This float is barbed to be pressed into tubing for the TankWatch and Dometic Tank Monitors for their low and mid levels. Part Number Legacy Item...

Dometic Plug-in Base Seal Kit The Dometic Sealand Plug-In Base Seal Kit is crafted for Dometic electronic flush toilets (excluding the 3000 bolt-down style bases). If your toilet bowl isn't...

Strainer Push In - 1-1/8" The 1 1/8″ Snap-in Qwik-Lok Strainer is a durable and precision-engineered design and easy-to-install installation make it a perfect fit for a variety of boat...

'T' Joiner for quick connect 15 manufactured by Whale. 'T' piece for use with Quick Connect 15 tubing. Part Number WHL-136624

Tube Cutters for quick connect 15 manufactured by Whale. Heavy duty cutter designed to cut Quick Connect 12 & 15 tubing squarely. Part...

System Converters for quick connect 15 manufactured by Whale. Converts from Quick Connect 12 to 15 Part NumberPack Quantity WHL-136637 2

DMfit Stem Enlarger - 15mm Tube Part Number Pack Size Type Weight Stem O.D. Tube O.D. DMF-448258 1 Enlarger 20g 12mm 15mm DMF-448258-10 10 Enlarger 200g 12mm 15mm

Twistloc Shut Off Valve Brass Part Number Pack Size Tube O.D. SAW-449290 1 15mm

Hose Tail for quick connect 15 manufactured by Whale. Part Number WHL-136642

Whale Ball Valve - Quick Connect 15 Ball valve for quick connect 15 manufactured by Whale. Polysulphur ball valve with Quick Connect 15 connections both ends. Large easy grip valve...

Twistloc Tank Connector - 15mm Tube BSP parallel thread with 'O'ring seal. Part Number Pack Size Type Tube O.D. Thread SAW-449250 1 Tank...

Harken's pressurized carbon fiber/composite reservoirs are among the lightest in the existence. They are installed in the bilge rather than at pump level for a low center of gravity.Maximum...

Harken's pressurized carbon fiber/composite reservoirs are among the lightest in the existence. They are installed in the bilge rather than at pump level for a low center of gravity.Maximum...

Tank Fitting for quick connect 15 manufactured by Whale. Designed to mount through up to 6mm material for direct connection of Quick Connect 15 tubing to the water tank. Part...

DMfit Stem Plug - 15mm Tube Part Number Pack Size Type Weight Tube O.D. DMF-448262 1 Stem Plug 20g 15mm DMF-448262-10 10 Stem Plug 200g 15mm

DMfit Barb Connector - 15mm Tube Part Number Barb I.D. / Pack Size Type Weight Tube O.D. DMF-448230 1/2" BSPPF / 1 Barb Connector 20g 15mm DMF-448230-10 1/2" BSPPF / 10 Barb...

Reducing Bushes made with polypropylene. BSP thread internal and external. Made from polypropylene. Part Number External Thread BSB  Internal Thread...

Elbow Tail made with Bronze. 90º cast bronze elbow with a BSP thread one end and a barbed hose tail on the other end. Part NumberHose SizeThread BSP BLA-138068 50mm (2") 2"

ATI Water Heater Pressure Relief Valve Replacement Pressure Relief Valve for ATI boilers KPA: 500 Part Number SAW-44292

Dometic Replacement Vacuum Switch - Assembly Snap On This new-style switch is designed to fit the VG4 J-Series vacuum generator to restore it to a functional condition. If the generator does...

Complete horizontal mount hose storage and deckwash system. Includes white moulded storage housing, 7.6 metre coiled hose with adjustable hose nozzle, deck wash connection hose and required...

Polyethylene Drinking Water Hose Only. Marine and RV drinking water hose made from food grade polyethylene to comply with NSF food grade international certification. Note: Hose sold in rolls...

Bronze intake strainer/scoop medium. Suits 2" skin fitting. Part Number Mount Screws Length x Width SAW-29288 5mm c/s 165 x 130 mm