2192 results for 'rule bilge pump auto'

White nylon oval shaped recessed shower storage holder with push-in soft PVC cap. Suits Nuova Rade hand shower sets. RWB2281 Oval shaped shower container Part Number Overall Width...

Impact Drain made with U.V. resistant plastic. Moulded in white high impact U.V. resistant plastic. Features low profile flush head, raised ribs for maximum grip and large bore for optimal...

DMfit Male Swivel Elbow Connector Brass - 15mm Tube BSP parallel thread with O ring seal Part Number Pack Size Type Weight Thread Tube O.D. DMF-448236 1 Male Swivel Elbow Connector 20g 1/2"...

The “Rebel 100” automatic jacket has been designed to fit the active young power boater that requires freedom of movement and wearer comfort, along with the added safety of automatic operation. The...

This is the heavy duty model of the range. The filter housing is made out of NAVIDURIN and features 38 mm hose connections. On top of the housing you can find a freshly designed metal lid, which...

Sierra Power Trim Hose - Mercruiser - S18-2435. Replaces: 32-861127, 32-95858 Fits: R/MR/Alpha/Alpha Gen II/Bravo I, II, III/ Bravo X, XR, XZ Serial number 0W099999 and below without quick connect...

Impeller Removal Tool suit Jabsco 500187HD Part Number SAW-200135

Lewmar Autopilot Drive Unit - Integra Mamba Drive Unit 12 volt Lewmar offer an Autopilot Drive Unit provision for all of their steering systems as well as for retro-fitting to any boat. This...

Seaflo Water Inlet Pressure Reducing Valve Seaflo water lilet is used for fresh water system and it is constructed with UV stabilized plastic. There are a check valve inside and different model...

Crewsaver Crewfit Rearming Kit 33g Automatic (for 150/165N) 33g CO2 re-arming pack for use with Crewsaver 150N lifejackets (except Crewfit Junior) for serial numbers starting with the letter L...

Italian made white hand shower sets which are ideal as a transom shower unit. The moulded plastic shower head has a lever action on / off switch and a moulded eye to hang it up. The set comes...

Quick Connect 15 Tubing manufactured by Whale in a 50m bulk pack. Semi rigid tubing with a 15mm OD and 11mm ID Available in red (for hot water), blue (for cold water) and green (for cold water &...

Ball Valve L Port - 316 Stainless Steel Part Number Thread SAW-45090 1/2" SAW-45091 3/4" SAW-45092 1" SAW-45093 1-1/4" SAW-45094<

Vetus Hose for Calorifiers for Calorifiers (per metre). Ideal for use with calorifiers and hot water systems Type HWHOSE is made of EPDM rubber with an inlay of woven synthetic fabric. Suitable for...

Vetus Plastic Hose Connector (2 Pieces) Waste water hose connector Part Number Hose Diameter Bending...

DMfit Tube Tee Union - 12mm Stem Can be used in multiples to create a 12mm manifold. Installing DMfit® Push-in and Twistloc® plumbing fittings significantly reduces labour time and costs compared...

Black Water Vent Filter with transparent lid for easy inspection. Part NumberDescriptionFilter TypeHose SizeMaximum CapacityMaximum Working Capacity SAW-458904 Black Water Air...

Vetus Ball Valve, Stainless Steel Part Number Thread (G) Bore Normal press (bar) Working temp (C) Dimensions (H x W x L) Weight (kg) Hose diameter in...

Can-SB Waste Tank Pick Up Part Number SAW-45265

TruDesign T Joiner - Male, Female, Female  UV and chemical resistance.  Long tail and thick polyethylene walls.  Operating temperature - 0 °C to 120 °C. Part NumberThreadOperating...

Polyethylene Drinking Water Hose with 2 PVC Quick Connect Fittings. Marine and RV drinking water hose made from food grade polyethylene to comply with NSF food grade international certification...

DMfit Straight Tube Connector for 15mm tubing.  DMfit is a quick-connect plumbing system that significantly reduces time and effort compared to traditional systems. Ideal for marine, RV & Caravan...

DMfit Collet Cover - 12mm Installing DMfit® Push-in and Twistloc® plumbing fittings significantly reduces labour time and costs compared to traditional fittings and hose clamps. The System...

Can-SB Waste Tank Accessories And Spare Parts Part Number SAW-45274

Twistloc Manifold Inlet Reducer Part Number Tube O.D. / Pack Size Stem O.D. Type SAW-449780 15mm / 1 28mm Reducer SAW-449780-10 15mm /...

High quality tough corrosion proof marelon material. Essential component on inlet and discharge plumbing of toilets installed below the static or heeled waterline. Simple valve system ensures water...

White nylon thru-hull connection skin fitting are moulded nylon glass reinforced polymer which dramatically increases strength, stiffness and light weight. Designed to be installed below water line...

 Simple straight connectors for joining two hoses of the same size. Glass reinforced nylon composite - High strength, stiffness and light weight. Immune to corrosion and electrolysis for long...

Vetus bronze hose connectors with a male thread. Part Number Thread Tail Diameter Overall...

Ronstan Straight Skin Fittings Suitable for drawing water in or for discharging saltwater. Its durable nylon construction proctects it from bumps, scratches, and corrosion. Built tough for the harsh...

DMfit Female Swivel Straight Connector - 15mm Tube BSP parallel thread with O ring seal Part Number Thread / Pack Size Type Weight Tube O.D. DMF-448222 1/2" BSPPF / 1 Swivel Union...

Twistloc Shut Off Valve Handle Type - 15mm x 15mm Tube Part Number Pack Size Tube O.D. SAW-449280 1 15

Crewsaver Crewfit 165N Sport Automatic with Harness - Navy Blue The refined Crewfit 165 Sport is a paramount safety solution which doesn’t compromise on safety, style, comfort or price. Ideal for...

White nylon fine threaded drain with push-on grip flanged end fitting. Can be used for draining motor or anchor wells. Simply cut to length required. Part NumberSize RWB-1435 25 x 58 RWB-1433 25...

High quality Australian made all plastic drain plugs complete with coloured plastic washer and retainer lug. Coarse thread complete drain - and coarse and fine thread plugs & washers only. Part...

Shower Wastes manufactured by Whale. The Whale® range of shower wastes (also knows as Gulleys) are available in two sizes to suit 19mm hose in both IC and non IC versions. Features include modern...

SeaStar 20 Degree Wedge for Front Mount Helms This kit is designed to install SeaStar and SeaStar Pro front mount helms at a 20º angle to the mounting surface. Four possible mounting configurations...

Vetus Plastic Y-connector Without Hose Connections The waste water connector line-up consists of a three-way valve, a Y-connector, a non-return valve and the additional hose connectors. The hose...

Tube Holder in white nylon manufactured by BLA. Handy nylon clips to store oars, paddles, boat hooks and similar. Part Number Tube Diameter Mount Base Mount Screws Design...

DMfit Through Bulkhead Union Push-In Tube Fitting Installing DMfit® Push-in and Twistloc® plumbing fittings significantly reduces labour time and costs compared to traditional fittings and hose...

Protects your boats water system from damaging pressures of unregulated city water connections. Limits inlet water pressure to 45 PSI and maintains regulated pressure at various flow rates. Flush...

White nylon flush mounting container supplied complete with hot and cold water mixer tap. Matches with Nuova Rade shower units . The container has a hinged door and an O ring seal. Chrome plated...

The HoseCoil hatch enclosure mounts flush into the deck or bulkhead. The twist lock lid has a waterproof O ring seal and completely removes from the enclosure for easy access to the hose. The hatch...

TruDesign Vented End Cap.    UV and chemical resistance.  Long tail and thick polyethylene walls.  Operating temperature - 0 °C to 120 °C. Part NumberDescriptionHose...

Cockpit Scupper manufactured by Marine Town. 316 Grade stainless steel hose pipe with removable strainer for easy cleaning. Low profile easy clean removable strainer features large hole size to...

White Washdown Hose in a 20m roll. Lightweight hose ideal for on board, mariners washdown and fender for small boats. White with blue stripe, super flexible water delivery hose. Non-marking. Not...

Vetus Connection Kit Waste Water Tank The installation kit consists of: 2 securing straps 1 inspection lid 1 fey for angel fittings Excludes exhaust tube Specifications Overall diameter...

Use the Garmin GNA 10 to connect a jog lever to our Reactor 40 autopilots on displacement hull boats. A jog lever is a rugged and simple steering control for work boats or trawlers. Adjust heading...

Lewmar Autopilot Drive Unit - Multi Position Direct Drive Tiller Lever Lewmar offer an Autopilot Drive Unit provision for all of their steering systems as well as for retro-fitting to any boat. Many...

TMC electric toilets offer the ease and convenience of push button electric operation. Supplied complete with wired switch box unit White vitreous china bowl with plastic seat & lid Strong motor &...

Thread Adaptor for quick connect 15 manufactured by Whale. Used to adapt 1⁄2" BSP threads to Quick Connect 15 tubing. Part NumberMaterialThread BSP WHL-136644 Plastic...

Blue Sea Systems ML Series Automatic Charging Relay with Manual Control - 500A Features: 500 Amp magnetic latching (bi-stable) relay automatically combines batteries during charging and isolates...

These large size Jabsco port kits allow Hotshot 6.0 Par-Max Plus 6.0 and old Jabsco Par-Max 7 & Flojet models to adapt to different sizes of hose and plumbing. The plug-in port part measures 23mm...

Ronstan Plastic Drain Plug with Chrome Brass Housing, 15/16" Hole Drain plug & housing, chromed brass body, Nylon plug Features Water tight seal. Retaining legs . Replacement plug...

Seaflo Soft Closing Toilet Seat and Lid Regular Need to replace the seat of your Seaflo Regular toilet? Check out the Seaflo Soft Closing Toilet Seat. It has a soft closing lid and is made of plastic...

Three Way Valve Quick Connect Adaptor for quick connect 15 manufactured by Whale. Three way ball valve provides two different flow directions. Housing constructed of brass with plastic System 15...

DMfit Flow Bend Clip - 12mm Tube Ensures bends in tube retain full flow. Installing DMfit® Push-in and Twistloc® plumbing fittings significantly reduces labour time and costs compared to...

DMfit Male Swivel Elbow Connector - 15mm Tube BSP parallel thread with O ring seal Part Number Thread / Pack Size Type

Lewmar Autopilot Drive Unit - Integra Base Drive 12 volt Bavaria Lewmar offer an Autopilot Drive Unit provision for all of their steering systems as well as for retro-fitting to any boat. Many...

Stylish chrome plated brass "flick" mixer sets mix hot and cold water using easy single lever action. Includes flexible reinforced hose with dual 3/8" & 1/2" male thread connections. Standard or long...