Enerdrive ePOWER 2600W 12V Pure Sine Wave Inverter with RCD, AC Transfer Switch & DC Cable Pack
The Enerdrive ePOWER 2600W 12V Pure Sine Wave Inverter delivers clean, energy-efficient AC power from your DC supply, providing reliable power for your home, boat, 4WD, truck or caravan. With a 2600W output, it is designed to operate appliances and equipment such as power tools, computers, microwave ovens and televisions.
The integrated 16A AC transfer switch allows seamless transfer between mains or generator power and inverter power, helping keep connected appliances running with minimal interruption. A built-in RCD safety switch monitors the electrical supply and disconnects the output within 0.03 seconds when a fault is detected. It also includes a test button for checking the safety switch.
Additional features include a removable LED remote control display panel, USB charging port and Enerdrive's PS6 operating mode. A 4-metre AC transfer cable with moulded male and female IEC plugs is included as standard, making installation easier and allowing the cable to be cut and hardwired where required.
Installation note: Check that the IEC plugs are fully inserted after off-road use and periodically every six months.
Features
- 2600W pure sine wave AC output
- Seamless 16A internal AC transfer switch
- Automatic AC transfer between mains/generator and inverter
- Built-in RCD safety switch with test button
- RCD disconnects output power within 0.03 seconds when a fault is detected
- Removable LED remote control display panel
- Regulated pure sine wave output
- USB port for charging USB devices
- PS6 operating mode
- Silent operation
- Compact design for easier installation
- Includes 4-metre AC transfer cable with moulded male and female IEC plugs
Included
- Enerdrive ePOWER 2600W 12V Pure Sine Wave Inverter with RCD and AC Transfer Switch
- Enerdrive 95mm² DC Cable Kit, 1.2m
| Part Number |
ENE-EN1226S-X-KIT |
| Input Voltage | 10.5–15.5 VDC |
| Wattage | 2600W |
| AC Output | 2600W, 11.3A |
| Output Voltage and Frequency | 230 VAC / 50Hz |
| Output Waveform | True Sine Wave |
| AC Transfer Switch | 16A Internal Transfer Switch |
| No Load Battery Draw | Less than 1.5 ADC |
| Under Voltage Alarm | 11.0 / 12.1 VDC |
| Under Voltage Alarm Recovery | 11.3 / 12.3 VDC |
| Under Voltage Shutdown | 10.5 / 11.8 VDC |
| Under Voltage Shutdown Recovery | 12.0 / 12.6 VDC |
| Over Voltage Shutdown | 15.5 VDC |
| USB Socket Output | 5V, 750mA |
| Product Dimensions (L x W x H) | 230 x 560 x 115mm |
| Net Weight | 7kg |
| Operating Altitude | Up to 3000 metres above sea level |
| Humidity | 5–90% non-condensing |
