Magnasine Smart Battery Combiner uses solid state control to direct the charge current from a single output Combi system to a secondary start battery.
Charge current maintained at 25amps to secondary battery to prevent excess current and overcharging.
| Part Number |
|---|
| MAG-ME-SBC |
Magnasine
The Magnasine Battery Monitoring Kit gives you a fuel gauge type of meter for your battery bank. It monitors the battery bank and reports the percentage state of charge, real time amps, voltage,...
Magnasine
Magnasine Battery Temperature Sensor Battery temperature sensor: 15" long cable Works with:Â LPCÂ Series, MM Series, MMS Series, MS Series, NP Series Part...
Magnasine
The ME-RTR or Router provides parallel capability for the MS-PAE Series inverters and includes many of the same features as the ME-ARC advanced remote control. The router is designed with a...
Victron
Victron Cyrix Battery Combiner, 400A Intelligent battery monitoring to prevent unwanted switching Some battery combiners will disconnect a battery in case of a short but high amperage load. A...
Victron
Victron Cyrix-ct Battery Combiner Kit This Battery Combiner Kit is for adding a 2nd or 3rd battery system in your car, boat, RV or any other vehicle. It utilizes the simplest and most advanced...