Enerdrive 350A Dual Circuit Plus Battery Switch Red
The Enerdrive 350A Dual Circuit Plus Battery Switch provides reliable control of two isolated battery banks, with the added flexibility to combine both banks to supply all loads when required. Its make-before-break contact design allows switching between positions without interrupting power.
Designed for marine electrical systems up to 32V DC, this switch is ignition protected for safe installation aboard gasoline-powered boats. The versatile case design supports both surface mounting and rear panel mounting, making it suitable for a range of marine electrical installations.
Features
- Simultaneously switches two isolated battery banks
- Allows battery banks to be combined to supply all loads
- Make-before-break contact design enables switching without power interruption
- 350A continuous current rating
- 525A intermittent current rating for 5 minutes
- 700A starting rating per circuit for 30 seconds
- Suitable for systems up to 32V DC
- Ignition protected for installation aboard gasoline-powered boats
- Surface or rear panel mounting options
- Red switch housing
- Tinned copper terminal studs
- 3/8"-16 (M10) terminal studs
- Accepts 1/4" (M6) mounting screws
| Part Number | ENE-BS-5511EB |
| Product Type | Dual Circuit Plus Battery Switch |
| Switch Type | Dual Circuit Plus |
| Switch Positions | 3 |
| Battery Inputs | 2 |
| Battery Combine | Yes |
| Alternator Field Disconnect | No |
| Maximum Voltage | 32V DC |
| Continuous Current Rating | 350A |
| Intermittent Current Rating | 525A for 5 minutes |
| Starting Rating | 700A per circuit for 30 seconds |
| Switching Rating | 25A |
| Terminal Stud Size | 3/8"-16 (M10) |
| Terminal Stud Material | Tinned copper |
| Terminal Stud Torque | 140 in-lb (15.82 Nm) |
| Recommended Cable Size | 4/0 AWG (120 mm²) |
| Cable Clearance for 4/0 AWG | 1.10 in (27.94 mm) |
| Mounting Holes | Accept 1/4" (M6) screws |
| Mounting Options | Surface or rear panel mounting |
| Ignition Protected | Yes |
