Cable Assembly for Override Trailer Brakes
Replace the fatigued cable or rusty adjuster on your trailer with this kit from Atlantic. It includes 8 or 10m of quality galvanised cable, a screw-type slack adjuster, and 6mm cable clamps.
Suitable for most trailers with cable actuated override brakes. Also suitable for handbrakes on some electric braked trailers.
Please Note: The brake mechanism itself should be adjusted before the cable. The cable adjuster is only used to remove slack. Brake dragging may be caused by broken lever springs, rust, or an overtightened cable.
Includes:
- Galvanised Steel Cable
- Cable Adjuster
- 4x Cable Clamps
- 2x Guide Pulleys (10m and 10m HD only)
| Part Number | Cable Length | Cable Size | PVC Coating | Guide Pulleys Included |
|---|---|---|---|---|
| ATC-ATLBCA8M | 8m | 4mm | Yes | No |
| ATC-ATLBCA10M | 10m | 4mm | Yes | Yes |
| ATC-ATLBCA-G-10M | 10m | 5mm | No | Yes |
