Can-SB Drinking Water Tank & Fittings
CAN-SB water tank complete with inspection porthole and fittings.
Available in several sizes to suit drinking water tank requirements on many boats. Moulded from high density green polyethylene.
Includes:
- Removable inspection port complete with pick-up tube
- 1-1/2 inch BSPF vented cap
- 3/8 inch BSPM x 3/8 inch/ 1/2 inch stepped outlet tail
- 3/8 inch BSPM x 5/8 inch / 3/4 inchstepped vent tail
- Installation pattern for standard 5 hole level sensor moulded into tank.
NOTE:
- Add 30 mm height for vented cap.
- Add 80mm height for swivel elbow inlet tail SAW-45275,
- Add 100mm height for SAW-45261.
| Part number | Capacity | Length | Width | Height |
|---|---|---|---|---|
| SAW-45280 | 32 Litres | 450mm | 390mm | 200mm |
| SAW-45282 | 39 Litres | 550mm | 390mm | 200mm |
| SAW-45284 | 45 Litres | 650mm | 390mm | 200mm |
| SAW-45286 | 52 Litres | 750mm | 390mm | 200mm |
| SAW-45290 | 57 Litres | 550mm | 390mm | 290mm |
| SAW-45291 | 60 Litres | 850mm | 390mm | 200mm |
| SAW-45292 | 77 Litres | 750mm | 390mm | 290mm |
