2727 results for 'turn point profil'

Garmin Cradle Mount Use the included carabiner and webbing loop to attach your compatible Garmin device to your pack. This non-powered cradle securely attaches to the back of your inReach Messenger®...

This upright lead block from Ronstan is typically used for halyards at the mast base. Lead blocks are a low-profile solution for leading halyards or other rig sail controls back to cleats or jammers...

Rounded Hinges with 144mm flat length manufactured by Marine Town. This range of hinges combine the durability of cast 316 grade stainless steel construction with low profile unobstructive design...

Ronstan Series 22 Ball Bearing Traveller Track - Silver - 3.0m Series 22 ball bearing traveller track with 6mm (1/4") countersunk fasteners at 100mm (3 15/16") centres and plunger stop holes at 50mm...

RELAXN Slimline Ultra bright Ceiling Light - White Housing Ideal for use in all interior marine, caravan, motor-home and camper trailer applications. Sealed poly-carbonate LED housing. 72 x...

50mm flat length hinges with cast 316 grade stainless steel manufactured by Marine Town. This range of hinges combine the durability of cast 316 grade stainless steel construction with low profile...

Ronstan Series 26 Control End with Double Sheave and Becket Control ends are used with mainsheet traveller and genoa sheeting systems to create purchase systems for easy adjustment of car position...

Ronstan Swiveling Large Bail Snap Shackle 122mm Stainless Steel, Large Bail Snap Shackle, 122mm Length Heavy duty plunger springs and precision components ensure dependable service. Body and hasp...

Ronstan Fixed Bail Snap Shackle 66mm Stainless Steel, Fixed Bail Snap Shackle, 66MM Length Heavy duty plunger springs and precision components ensure dependable service. Body and hasp profiles are...

Ram Mounts GDS USB Type-C and Type A 2-Port Cigarette Charger This two-port GDS USB Type-C and USB Type-A cigarette charger (RAM-GDS-CHARGE-PPS-CIGC) allows for charging two devices simultaneously...

Ram MountsRoto-Mag 3-in-1 Accessory for Zebra ET4x 8" Tablet The GDS Roto-Mag 3-in-1 Grip Handle Accessory for Zebra ET4x 8” Enterprise Tablet (RAM-GDS-ROTO2-ZE20U) replaces the tablet's OEM...

Ronstan Series 32 T-Track Genoa Slide with Series 60 Core Block™ and Plunger Stop Series 32 genoa car with S60 Core Block™, suits 12mm (1/2") sheet and lock up/down plunger stop. T-Track systems...

Flag Pole 304G S/S Rod Holder Mount 304G stainless steel. Tapered nylon sleeve floats on lower tube to ensure tight fit. Moulded nylon base with cross to suit up to 1/4in gimbal pin. Flag...

This upright lead block with a 20mm sheave from Ronstan is typically used for halyards at the mast base. Lead blocks are a low-profile solution for leading halyards or other rig sail controls back to...

Marine Town Hinges with cast 316 grade stainless steel and 40/20mm Split. This range of hinges combine the durability of cast 316 grade stainless steel construction with low profile unobstructive...

Ronstan Series 30 Sliderod Shackle Car Series 30 shackle car with sliderods and 2x M6 screws.  Car bodies are machined to precise specifications, then honed to an exceptional finish before being...

Louvre Vent 304G Stainless Steel Black PVD Finish - 230 x 115mm Used where permanent ventilation is required. Stamped 304G stainless steel. Choice of highly polished or black PVD finish. Low...

Ram Mounts Pin-Lock Security Kit for Double Swing Arms The RAP-S-KNOB-109-1U includes Pin-Lock™ security knobs/keys for double swing arms. The RAP-S-KNOB-109-1U offers the ideal amount of leverage...

Gamakatsu  Inline Octopus Circle SE - Pk Gamakatsu's Circle Inline Point Octopus Hook is the same design as the Octopus Circle, but without the offset. Designed expressly to conform with some...

Zhik Active PFD - Black Zhik’s Active PFD blends Zhik’s high-performance features with affordability, designed to serve a broader range of water sports enthusiasts. Built for those who value...

X-Series underwater lights manufactured by OceanLED. The OceanLED X-Series combines brightness with affordability. Whether cruising or fishing, the X16 gives stunning performance allowing you to...

Ronstan Series 50 All Purpose Upright Lead Block Single upright, Requires 2x 6mm (1/4") fasteners Lead blocks are a low profile solution for leading halyards or other rig sail controls back to...

Ronstan Series 42 Sliderod Genoa Car with 1000mm Sheave Series 42 genoa car with 100mm sheave and sliderods. Car bodies are machined to precise specifications, then honed to an exceptional finish...

BayStar side mount cylinder. This cylinder is suitable for installation in shallow splashwells and use on engines rated to 150HP. Features: The simplest of hydraulic installations One common...

Ram Mounts Size B Motorcycle Twist and Tilt Base Made of die cast marine grade aluminum, durability won’t be a concern. The patented rubber ball dampens shock and vibration helping to maintain the...

Drain plug with large diameter and brass base manufactured by BLA. Chrome brass body with a black nylon bung featuring a retainer to prevent loss, rubber seal, large grip for ease of opening and...

Ram Mounts Size B 1" Double Ball Swivel The RAP-B-230-1U consists of dual 1" balls, with a swivel middle connection point, that allow the connection of two 1" socket arms. The swivel feature...

The Plastimo dorade box vent allows continuous ventilation when sailing or moored, even in bad weather, whilst ensuring the boat remains dry. The dorade box is made from rigid plastic with a large...

Hinges with a flush service manufactured by Marine Town. This range of hinges combine the durability of cast 316 grade stainless steel construction with low profile unobstructive design. The...

Ronstan Series 30 Ball Bearing Traveller Track - Silver - 3m Series 30 ball bearing traveller track with 8mm (5/16") fasteners at 100mm (3 15/16") centres and plunger stop holes at 50mm (1 31/32")...

Ronstan Series 55 Ball Bearing Traveller Track - Black - Multiple Sizes Available Series 55 ball bearing traveller track with 12mm (1/2") fasteners at 100mm (3 15/16") centres and plunger stop holes...

Harken Twist Shackle Forged stainless steel shackles are polished to a high luster and are stamped with the screw pin diameter. Twist shackles are forged with a 90-degree twist so the two attachment...

Stainless Steel Ring for clew points on large sails and other rigging applications. Normally attached to sail with Dyneema or Spectra webbing. Tig welded for maximum strength. Polished and...

Blue Sea Cable Cap - extra large - 32mm cap ID - suits wire 95-120mm² (3/0-4/0AWG)   Insulates single stud on batteries, alternators, starters, windlasses and high amperage termination points Part...

Spartan Manganese Bronze Chain Plate - Lightweight Manganese bronze chain plates from Spartan Marine in the USA.  These small burnished fittings provide robust deck mounting points for rigging and...

For inboard engines. Balanced: the number of turns lock-to-lock is equal port to starboard or vice-versa. Recommended for inboards up to 8m (26ft) where maximum boat speed do not exceed 25mph...

Midrange Hexaratchet blocks grip loaded sheets, yet allow sailors to ease and trim quickly and with complete control. A switch on the side engages and disengages the ratchet mechanism. Mote: DO...

Reelax Tag Pole GoPro Camera Mount Adaptor Turn your Reelax Tag Pole into a GoPro Camera Boom with this handy little adaptor. Suits both the Reelax Telescopic Aluminium Tag Poles...

Ronstan Stepped U-Bolt 5/16" UNC x 5" Studs 316 stainless steel round bend turned U-bolt, supplied with top plate, backing plate, and nuts. Features Grade 316 Stainless Steel Stepped...

Ideal for small boats, kayaks, tenders Etc where there is no 12v battery onboard - or as an emergency set of nav lights on larger craft. Available in standard bulb type - or long life, low draw LED...

Ram Mounts Size B PVC Pipe Socket Mount with Universal Action Camera Adapter Complete your Tough-Pole™ kit with this double ball mount for securing your action camera in the perfect capturing angle...

Midrange Hexaratchet blocks grip loaded sheets, yet allow sailors to ease and trim quickly and with complete control. A switch on the side engages and disengages the ratchet mechanism. Note: DO...

Midrange Hexaratchet blocks grip loaded sheets, yet allow sailors to ease and trim quickly and with complete control. A switch on the side engages and disengages the ratchet mechanism. Note: DO...

Low friction High static and dynamic load capacity Lightweight Single point mounting Precision moulded Acetal sheaves running on stainless steel or Torlon® ball bearings provide high...

Blue Sea Cable Cap - Small - 11mm cap ID - suits wire size 0.75-6mm² (10-18AWG) Insulates single stud on alternators, starters, windlasses and high amperage termination points Part...

DMfit Tube Support Double Seal Used to increase tube wall thickness at the point of connection with added security of a double 'O' ring seal. Part Number Pack Size Type Weight Tube O.D. Tube I.D...

Features: Ultra Lightweight Low friction 2-stage Orbital ball bearing system Highest working load in its class Low profile and compact High performance cleating Easily fitted and securely...

Low Boy Bilge Pump manufactured by Johnson Pump SPX FLOW. Low profile pump design for ease of mounting and removal in tight bilge areas. Perfect for boats where bilge pumps are mounted beneath...

Spinlock TWR Sheave Line Diverter TWR Organiser is a development of Spinlock's successful TSR Organiser Range, offering a high load, single line diverter for lines up to a massive 2.5 tonnes...

Ronstan Series 14 Traveller Car - Pivoting Shackle Top (Short) Series 14 traveller car with pivoting shackle top suitable for dinghy and catamaran traveller and jib sheet systems. Car bodies are...

Ronstan Swiveling Fork Head Snap Shackle 95mm Stainless Steel, Fork Head Snap Shackle, 95mm Length Heavy duty plunger springs and precision components ensure dependable service. Body and hasp...

Ronstan Series 60 Ratchet Sheave Alloy, 60mm x 16.9mm x ID6.3mm 14:1 holding power The patented extruded hole design, in conjunction with the groove profile of the sheave, provides a more powerful...

Ronstan Series 40 Ball Bearing Exit Block, Narrow 40mm Acetal Sheave, Anodised Aluminium Housing, Requires 2x 6mm (1/4") Fasteners. Reduced width sheave box for lower load applications. Exit Blocks...

Ronstan Series 40 Upright Lead Block, All Purpose Single sheave all purpose upright lead block. Requires 2x 5mm (3/16") fasteners Lead blocks are a low profile solution for leading halyards or...

Ronstan Series 30 Ball Bearing Block, Upright Lead Single upright Lead blocks are a low profile solution for leading halyards or other rig sail controls back to cleats or jammers. Precision...

Stainless Steel Andersen Winch Handle  Ergonomically designed for efficient power transfer, ANDERSEN polished stainless Winch Handles perfectly compliment the functional beauty of our unique winch...

Ronstan Orbit 30QT 2-Speed Self-Tailing Winch with Quick Trim Ronstan’s Orbit Winches™ are the new benchmark in high performance alloy winches. With a combination of fresh design thinking and proven...

Midrange Hexaratchet blocks grip loaded sheets, yet allow sailors to ease and trim quickly and with complete control. A switch on the side engages and disengages the ratchet mechanism. Note: DO...

The Stayput T Lock system is a new style of fastener for attaching fabric to a hard surface. The Cap and Key mount to a #4 eyelet on the cover and remain attached. With a 1/4 turn twist they easily...

Ronstan Stepped U-Bolt 5/16" UNC x 1 1/2" Studs 316 stainless steel round bend turned U-bolt, supplied with top plate, backing plate, and nuts. Grade 316 Stainless Steel Stepped studs Supplied...